LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Continuously Variable Transmission (CVT)) >> Trouble Diagnosis >> CONSULT-II Function (TRANSMISSION) >> Self-Diagnostic Result Mode >> How to Erase Self-diagnostic Results

How to Erase Self-diagnostic Results

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
    Fig 1: CONSULT-II Display - SELECT DIAG MODE
    G04899604Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "ERASE". (The self-diagnostic results will be erased.)
    Fig 2: CONSULT-II Display - SELF-DIAG RESULTS
    G04916043Courtesy of NISSAN MOTOR CO., U.S.A.