LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Continuously Variable Transmission (CVT)) >> Trouble Diagnosis For Symptoms >> Engine Cannot Be Started in "P" or "N" Position >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF-DIAGNOSTIC RESULTS 

    Perform self-diagnosis check. Refer to "SELF-DIAGNOSTIC RESULT MODE ".

    Do the self-diagnostic results indicate PNP switch circuit or start signal circuit? 

    YES: Check PNP switch circuit or start signal circuit. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH " or "DTC P0615 START SIGNAL CIRCUIT ".

    No: GO TO 2.

  2. CHECK CVT POSITION 

    Check CVT position. Refer to "CHECKING OF CVT POSITION "

    OK or NG 

    OK: GO TO 3.

    NG: Adjust CVT position. Refer to "ADJUSTMENT OF CVT POSITION ".

  3. CHECK STARTING SYSTEM 

    Check starting system. Refer to "STARTING SYSTEM ".

    OK or NG 

    OK: INSPECTION END 

    NG: Repair or replace damaged parts.

scientia non olet · About LEMON Manuals