LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Continuously Variable Transmission (CVT)) >> Trouble Diagnosis For Symptoms >> Cannot Be Changed to Manual Mode >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF-DIAGNOSTIC RESULTS 

    Perform self-diagnosis check. Refer to "SELF-DIAGNOSTIC RESULT MODE ".

    Is any malfunction detected by self-diagnosis? 

    YES: Check the malfunctioning system. Refer to "DISPLAY ITEMS LIST ".

    No: GO TO 2.

  2. CHECK MANUAL MODE SWITCH 

    Check the manual mode switch circuit. Refer to "DTC P0826 MANUAL MODE SWITCH CIRCUIT ".

    OK or NG 

    OK: GO TO 3.

    NG: Repair or replace damaged parts.

  3. SYMPTOM CHECK 

    Check again. Refer to "CRUISE TEST ".

    OK or NG 

    OK: INSPECTION END 

    NG: GO TO 4.

  4. CHECK TCM 
    1. Check TCM input/output signals. Refer to "TCM INPUT/OUTPUT SIGNAL REFERENCE VALUES ".
    2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

    OK or NG 

    OK: INSPECTION END 

    NG: Repair or replace damaged parts.

scientia non olet · About LEMON Manuals