Diagnostic Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch ON and start engine.
2. Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-II.
Is any malfunction of the "U1000 CAN COMM CIRCUIT" indicated?

YES: Print out CONSULT-II screen, go to LAN article. Refer to "PRECAUTIONS WHEN USING CONSULT-II ".

NO: INSPECTION END

Fig 1: CONSULT-II Display - Self-Diag Results
Courtesy of NISSAN MOTOR CO., U.S.A.