LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Continuously Variable Transmission (CVT)) >> DTC P0840 Transmission Fluid Pressure Sensor A Circuit (Sec Pressure Sensor) >> Wiring Diagram - CVT - SECPS

Wiring Diagram - CVT - SECPS

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Refer to POWER SUPPLY, GROUND & CIRCUIT ELEMENTS .

Fig 1: Wiring Diagram - CVT-SECPS-01
G04916141Courtesy of NISSAN MOTOR CO., U.S.A.

TCM terminal data are reference values, measured between each terminal and ground.

TCM TERMINAL DATA REFERENCE VALUES

Terminal Wire color Item Condition Data (Approx.)
37 V/W Transmission fluid pressure sensor A (Secondary pressure sensor)
G04916142Courtesy of NISSAN MOTOR CO., U.S.A.
"N" position idle 1.0 V
42 W/R Sensor ground Always 0V
46 L/O Sensor power
G04916143Courtesy of NISSAN MOTOR CO., U.S.A.
- 5.0 V
G04916144Courtesy of NISSAN MOTOR CO., U.S.A.
- 0 V