Torque Converter Clutch Solenoid Valve

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect CVT unit harness connector.

Check resistance between CVT unit harness connector terminal and ground.

RESISTANCE REFERENCE CHART

Solenoid Valve	Connector	Terminal	Resistance (Approx.)
Torque converter clutch solenoid valve	F30	12 - Ground	3.0 - 9.0 Ω

Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminal And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".