LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Continuously Variable Transmission (CVT)) >> DTC P0730 Belt Damage >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 

    Perform "DTC Confirmation Procedure". Refer to "DTC CONFIRMATION PROCEDURE ".

    Are any DTC displayed? 

    YES - 1: DTC except for "P0730 BELT DAMG" is displayed: Go to Check the DTC detected item. Refer to "SELF-DIAGNOSTIC RESULT MODE ".

    YES - 2: DTC for "P0730 BELT DAMG" is displayed: Replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".

    NO: INSPECTION END 

scientia non olet · About LEMON Manuals