LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 895 (Wiper, Washer & Horn) >> Front Wiper And Washer System >> Washer Fluid Reservoir >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull out washer fluid reservoir inlet.
  2. Remove fender protector. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove front washer motor connector and washer fluid level switch connector.
  4. Remove washer fluid reservoir screws.
  5. Remove washer hose and remove the washer fluid reservoir from the vehicle.
    Fig 1: Identifying Washer Fluid Reservoir
    G04918109Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals