LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 895 (Wiper, Washer & Horn) >> Front Wiper And Washer System >> CONSULT-II Function (IPDM E/R) >> Data Monitor >> All Signals, Main Signals, Selection from Menu

All Signals, Main Signals, Selection from Menu

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
MONITOR DESCRIPTION CHART

Item name CONSULT-II screen display Display or unit Monitor item selection Description
ALL SIGNALS MAIN SIGNALS SELECTION FROM MENU
Front wiper request FR WIP REQ STOP/1LO/LO/HI x x x Signal status input from BCM.
Wiper auto stop WIP AUTO STOP ACT P/STOP P x x x Output status of IPDM E/R.
Wiper protection WIP PROT OFF/LS/HS/BLOCK x x x Control status of IPDM E/R.
NOTE: Perform monitoring of IPDM E/R data with the ignition switch ON. When the ignition switch is at ACC, the display may not be correct.