LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 895 (Wiper, Washer & Horn) >> Front Wiper And Washer System >> CONSULT-II Function (BCM) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "WIPER" on the "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on the "SELECT DIAG MODE" screen.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on the "SELECT MONITOR ITEM" screen.
    DIAGNOSTIC CHART

    ALL SIGNALS Monitors all the items.
    SELECTION FROM MENU Selects and monitors the individual item selected.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals