LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 894 (Starting & Charging System) >> Generator >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove radiator. Refer "REMOVAL AND INSTALLATION ".
  3. Remove the drive belt. Refer to "DRIVE BELTS ".
  4. Remove idler pulley.
  5. Remove the generator adjustable top mount, using power tools.
  6. Remove the generator lower bolt and nut, using power tools.
    Fig 1: Generator Lower Bolt And Nut With Torque Specifications
    G04917788Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Disconnect the generator harness connectors.
  8. Remove the generator upper bolt, using power tools.
  9. Remove the generator.
scientia non olet · About LEMON Manuals