LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (Engine Lubrication System) >> Oil Pump >> Disassembly and Assembly >> Inspection After Disassembly >> Regulator Valve

Regulator Valve

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Pressure Regulator Valve
    G04886280Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Visually inspect components for wear and damage.
  2. Check oil pressure regulator valve sliding surface and valve spring.
  3. Coat regulator valve with engine oil. Check that it falls smoothly into the valve hole by its own weight.

    If damaged, replace regulator valve set or oil pump body  .