LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 891 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> Wheel >> Inspection

Section 891 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)): Wheel: Inspection

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
    1. Remove tire from wheel and mount wheel on a tire balance machine.
    2. Set dial indicator as shown in the illustration.

      Wheel runout (Dial indicator value):  Refer to "ROAD WHEEL ".

    Fig 1: Checking Lateral And Radial Runout Using Dial Gauge Indicator
    G04876560Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check front wheel bearings for looseness.
  4. Check front suspension for looseness.
scientia non olet · About LEMON Manuals