LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Engine Mechanical) >> Service Data And Specifications (SDS) >> Standard and Limit >> Connecting Rod Bearing >> Undersize

Connecting Rod Bearing: Undersize

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Unit: mm (in)

UNDERSIZE THICKNESS SPECIFICATION

  Thickness Crank pin journal diameter "Dp"
0.25 (0.0098) 1.626 - 1.634 (0.0640 - 0.0643) Grind so that bearing clearance is the specified value.
scientia non olet · About LEMON Manuals