LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Engine Mechanical) >> Oil Seal >> Removal and Installation of Rear Oil Seal >> Removal

Removal and Installation of Rear Oil Seal: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transaxle. Refer to "TRANSAXLE ASSEMBLY ".
  2. Remove drive plate (CVT).
  3. Remove rear oil seal using a suitable tool.
    CAUTION: Be careful not to damage crankshaft and cylinder block.
    Fig 1: Removing Rear Oil Seal With Suitable Tool
    G04878406Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals