Camshaft End Play
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Install the camshaft in the cylinder head.
- Install dial gauge in thrust direction on front end of camshaft. Measure end play when camshaft is moved forward/backward (in direction to axis) as shown.
Standard: 0.115 - 0.188 mm (0.0045 - 0.0074 in)
Limit: 0.24 mm (0.0094 in)
- If out of the specified range, replace with new camshaft and measure again.
- If out of the specified range again, replace with new cylinder head.