How To Read Harness Layout
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
- Main Harness and Console Sub-harness
- Engine Room Harness (LH View) Engine Compartment
- Engine Room Harness (RH View) Engine Compartment
- Engine Control Harness, Engine Control Sub-harness-1, Engine Control Sub-harness-2, Engine Control Sub-harness-3.
- Body Harness and Tail Harness
- Body No. 2 Harness and Body No. 3 Harness
- Room Lamp Harness
To use the grid reference
- Find the desired connector number on the connector list.
- Find the grid reference.
- On the drawing, find the crossing of the grid reference letter column and number row.
- Find the connector number in the crossing zone.
- Follow the line (if used) to the connector.