Removal and Installation: Removal
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the shift knob.
- Remove the shift bezel.
- Remove cluster lid C. Refer to "CLUSTER LID C ".
- Remove cluster lid D. Refer to "CLUSTER LID D ".
- Remove the center stack.
- Remove the bolts securing the rear of the unified meter and A/C auto amp.
- Remove the bolts on either side of display screen.
- Gently spread the top of the bracket and remove the unified meter and A/C auto amp.