LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 886 (Automatic Air Conditioner) >> Trouble Diagnosis >> CONSULT-II Function (BCM) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "AIR CONDITIONER" on "SELECT TEST ITEM" screen.
    Fig 1: CONSULT-II Display - SELECT TEST ITEM Screen
    G04917529Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
    Fig 2: CONSULT-II Function Screen Display - SELECT DIAG MODE
    G04899604Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.
    ITEMS REFERENCE CHART

    ALL SIGNALS Monitors all the items.
    SELECTION FROM MENU Selects and monitors the individual item selected.
    Fig 3: CONSULT-II Display - DATA MONITOR
    G04917531Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals