Removal and Installation for High-pressure Pipe: Installation

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

High-pressure pipe (evaporator side) bolt: Refer to "COMPONENTS ".

High-pressure pipe (condenser side) bolt: Refer to "COMPONENTS ".

CAUTION:

Replace the O-ring of the high-pressure pipe with a new one, then apply compressor oil to it when installing it.
After charging refrigerant, check for leaks. Refer to "CHECKING FOR REFRIGERANT LEAKS ".