LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 886 (Automatic Air Conditioner) >> In-Vehicle Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower driver instrument panel. Refer to "LOWER DRIVER INSTRUMENT PANEL ".
  2. Remove the in-vehicle sensor screw.
  3. Remove the in-vehicle sensor.
    Fig 1: Locating Screws For In-Vehicle Sensor
    G04887464Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals