LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 886 (Automatic Air Conditioner) >> Blower Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box assembly. Refer to "GLOVE BOX ASSEMBLY AND HOUSING ".
  2. Remove the center console side cover. Refer to "FRONT CENTER CONSOLE ".
  3. Disconnect the battery negative terminal.
  4. Remove the ECM.
  5. Disconnect the blower motor, intake door motor, and fan control amp. connector.
  6. Disconnect the main harness from the top of the blower unit.
  7. Remove the two bolts and one screw from the blower unit as shown.
  8. Remove the blower unit.
    Fig 1: Identifying Blower Unit Bolts And Screw
    G04917651Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals