LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 843 (Exterior & Interior) >> Rear Bumper >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove LH and RH rear fascia struts.
  2. Remove rear fascia lower stay bolts.
  3. Remove fascia front upper bolts near wheel opening.
  4. Release left pinch rail clips and remove LH side of rear bumper fascia from quarter panel.
  5. Release right pinch rail clips and remove RH side of rear bumper fascia from quarter panel.
  6. Remove fascia rear upper bolts near combination lamp.
  7. Remove rear bumper fascia.
  8. Disconnect harness on left side of tow hitch.
  9. Remove rear bumper reinforcement.
  10. Remove drafter duct from lower side of LH quarter panel.