Wheel Alignment (Unladen1)6

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATION

Drive type

2WD

4WD

Camber Degree minute (decimal degree)

Minimum

-0° 30' (-0.50°)

-0° 15' (-0.25°)

Nominal

0° 15' (0.25°)

0° 30' (0.50°)

Maximum

1° 00' (1.00°)

1° 15' (1.25°)

Cross camber

0° 45' (0.75°) or less

Caster Degree minute (decimal degree)

Minimum

2° 15' (2.25°)

2° 00' (2.00°)

Nominal

3° 0' (3.00°)

2° 45' (2.75°)

Maximum

3° 45' (3.75°)

3° 30' (3.50°)

Cross caster

0° 45' (0.75°) or less

Kingpin inclination
Degree minute (decimal degree)

Nominal

13° 0' (13.00°)

12° 45' (12.75°)

Total toe-in

Distance (A - B)

Minimum

2.1 mm (0.08 in)

Nominal

3.1 mm (0.12 in)

Maximum

4.1 mm (0.16 in)

Angle (left wheel or right wheel) Degree minute (decimal degree)

Minimum

0° 5' (0.08°)

Nominal

0° 7' (0.12°)

Maximum

0° 9' (0.15°)

Wheel turning angle (full turn)

Inside
Degree minute (Decimal degree)

33° 26' - 35° 26'⁽¹⁾ (33.43° - 35.43°)

33°33' - 35° 33'⁽³⁾ (33.60° - 35.60°)

Outside
Degree minute (Decimal degree)

29° 22' - 31° 22'⁽²⁾ (29.37° - 31.37°)

29° 38' - 31° 38'⁽⁴⁾ (29.73° - 31.73°)

*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.

*6: Some vehicles may be equipped with straight (non-adjustable) lower link bolts and washers. In order to adjust camber and caster on these vehicles, first replace the lower link bolts and washers with adjustable (cam) bolts and washers.

⁽¹⁾	Target value 35° 26' (35.43°)

⁽²⁾	Target value 31° 22' (31.37°)

⁽³⁾	Target value 35° 33' (35.55°)

⁽⁴⁾	Target value 31° 38' (31.63°)

Wheel Alignment (Unladen*1)*6

Wheel Alignment (Unladen1)6