LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 839 (Front Suspension) >> Coil Spring And Shock Absorber >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing coil spring on strut, it must be positioned as shown.
    Fig 1: Identifying Installation Position Of Coil Spring
    G04899153
  2. Install the shock absorber mounting insulator as shown in line with lower shock mount and step in lower seat.
    • The step in the strut assembly lower seat faces outside of vehicle.
      • Fig 2: Identifying Shock Absorber Mounting Insulator
      G04899154
  3. Tighten the new piston rod lock nut to specification. Refer to "COMPONENTS ".
    • Use a new piston rod lock nut for assembly.
  4. Remove commercial service tool.
scientia non olet · About LEMON Manuals