LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 838 (Rear Suspension) >> Stabilizer Bar >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stabilizer bar ends from the connecting rods using power tool.
    Fig 1: Identifying Stabilizer Bar End From Connecting Rods
    G04912330
  2. Remove the stabilizer bar clamps using power tool, and remove the stabilizer bar bushings.
    Fig 2: Identifying Stabilizer Bar Clamp Nuts
    G04912348
  3. Remove the stabilizer bar.
scientia non olet · About LEMON Manuals