LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 838 (Rear Suspension) >> Shock Absorber >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire assembly using power tool. Refer to "ROTATION ".
  2. Position a suitable jack under the front lower link to support the shock absorber.
  3. Remove the shock absorber upper and lower end bolts using power tool.
    Fig 1: Identifying Shock Absorber Upper And Lower End Bolts
    G04912331
  4. Remove the shock absorber.
scientia non olet · About LEMON Manuals