Wheel Alignment Inspection: Camber
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Measure camber of both the right and left wheels with a suitable alignment gauge and adjust as necessary to specification.
Camber : Refer to "WHEEL ALIGNMENT ".
- If outside of the specified value, adjust the camber using the adjusting bolt in the front lower link.CAUTION: After adjusting the camber then check the toe-in.NOTE: Camber changes about 0° 5' with each graduation of the adjusting bolt.
- Tighten the adjusting bolt nuts to specification.