Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:

When installing the breather hose make sure the painted marking on the metal end of breather hose is to the front of the vehicle and there are no pinched or restricted areas on the breather hose caused by folding or bending when installing it.
Make sure the breather hose plastic connectors are in the appropriate holes.
Fill the front final drive assembly with differential gear oil after installation. Refer to "DIFFERENTIAL GEAR OIL ".