Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Apply ATF to the new metal bushing, then install the new metal bushing until it becomes "Dimension A" using Tool.
Tool number : ST35300000 ( - )

Dimension A : 7.7 - 8.3mm (0.303 - 0.327in)

Fig 1: Applying ATF To Metal Bushing

CAUTION: Do not reuse metal bushing.
Apply ATF to the new needle bearing, then install the new needle bearing until it becomes "Dimension B" using Tool.
Tool number : ST33220000 ( - )

Dimension B : 62.5 - 63.1mm (2.461 - 2.484in)

CAUTION: Do not reuse needle bearing.

Fig 2: Applying ATF To Needle Bearing
Install the carrier bearing to the sun gear using Tools.
Tool number A: ST30720000 (J-25405)

B: ST27863000 ( - )

Fig 3: Identifying Carrier Bearing To Sun Gear
Install the new snap ring to the sun gear assembly using suitable tool.
CAUTION: Do not reuse snap ring.

Fig 4: Identifying Snap Ring On Sun Gear Assembly
Install the sun gear assembly to the planetary carrier assembly.
Install the new snap ring to the planetary carrier assembly.
CAUTION: Do not reuse snap ring.

Fig 5: Identifying Snap Ring To Planetary Carrier Assembly