Preparation For Road Test

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of the test is to determine overall performance of transfer and analyze causes of problems.
When a malfunction is found in any part of transfer, perform the road test to locate the malfunction area and repair the malfunction parts.
The road test consists of the following three parts.
- Check before engine is started. Refer to "CHECK BEFORE ENGINE IS STARTED ".
- Check at idle. Refer to "CHECK AT IDLE ".
- Cruise test. Refer to "CRUISE TEST ".
  
  Fig 1: Identifying Road Test Procedure Chart