Component Inspection
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "OFF". (Stay for at least 5 seconds.)
- Disconnect transfer terminal cord assembly harness connector.
- Check resistance between transfer terminal cord assembly terminals 2 and 3.CONNECTOR TERMINAL RESISTANCE REFERENCE
Temperature °C (°F) Resistance (Approx.) 20 (68) 2.5 kΩ 80 (176) 0.3 kΩ - If NG, replace the transfer fluid temperature sensor. Refer to "LOCATION OF ELECTRICAL PARTS ".