Component Inspection
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "OFF". (Stay for at least 5 seconds.)
- Disconnect neutral-4LO switch harness connector.
- Remove neutral-4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
- Push and release neutral-4LO switch and check continuity between neutral-4LO switch terminals 12 and 13.CONNECTOR TERMINAL CONTINUITY REFERENCE
Terminal Condition Continuity 12 - 13 Push neutral-4LO switch Yes Release neutral-4LO switch No - If NG, replace the neutral-4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".