LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 834 (Transfer Case) >> ATX14B >> Trouble Diagnosis For System >> 2-4WD Solenoid >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "OFF". (Stay for at least 5 seconds.)
  2. Disconnect transfer terminal cord assembly harness connector.
  3. Check resistance between transfer terminal cord assembly terminals 4 and 5.

    4 - 5 : Approx. 22.8 - 25.2 Ω 

    Fig 1: Checking Resistance Between Transfer Terminal Cord Assembly Terminals 4 And 5
    G04910117
  4. If NG, replace the 2-4WD solenoid. Refer to "LOCATION OF ELECTRICAL PARTS ".
scientia non olet · About LEMON Manuals