LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 834 (Transfer Case) >> ATX14B >> Transfer Assembly >> Disassembly and Assembly >> Inspection After Disassembly >> Main Oil Pump

Main Oil Pump

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the inner and outer circumference, tooth face, and sideface of the inner and outer gears for damage or abnormal wear.
  2. Measure the side clearance between the main oil pump housing edge and the inner and outer gears.
  3. Make sure the side clearance is within specification. If the measurement is out of specification, replace the inner and outer gears with new ones as a set. Refer to "MAIN OIL PUMP ".

    Specification : 0.015 - 0.035 mm (0.0006 - 0.0014 in) 

    Fig 1: Measuring Clearance Between Main Oil Pump Housing And Inner And Outer Gears
    G04901699
scientia non olet · About LEMON Manuals