Inspection After Disassembly: Clutch

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Check the drive plate facings and driven plate for damage, cracks or other abnormality. If any abnormalities are found, replace with a new one.
Check the thickness of the drive plate facings and driven plate. Refer to "CLUTCH ".
CAUTION:
- Measure facing thickness at 3 points to take an average.
- Check all drive and driven plates.
- Check return spring for damage or deformation.
- Do not remove spring from plate.
  
  Fig 1: Identifying Drive Plate Facings And Driven Plate Thickness