LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 833 (Instrument Panel) >> Instrument Panel Assembly >> Removal and Installation >> Cluster Lid C - Without Navigation System >> Removal

Cluster Lid C - Without Navigation System: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before servicing, turn the ignition switch off, disconnect both battery cables and wait at lease 3 minutes.
  1. Disconnect battery negative terminal.
  2. Disconnect battery positive terminal.
  3. Remove A/T finisher. Refer to "A/T FINISHER ".
  4. Remove storage tray and storage tray liner, then remove cluster lid C screw.
  5. Pull cluster lid C rearward to release clips.
  6. Disconnect electrical connectors and remove cluster lid C.