Removal and Installation: Inspection

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the propeller shaft runout. If runout exceeds the limit, replace the propeller shaft assembly.
Propeller shaft runout limit

2WD : 1.02 mm (0.0402 in) or less

4WD : 0.6 mm (0.024 in) or less

Fig 1: Identifying Propeller Shaft Measuring Range
While holding the flange yoke on one side, check axial play of the joint as shown. If the journal axial play exceeds the specification, repair or replace the journal parts.
Journal axial play : 0.02 mm (0.0008 in) or less

Fig 2: Checking Axial Play Of Joint
Check the propeller shaft tube for dents or cracks. If damage is detected, replace the propeller shaft assembly.