Turn Signal Lamps Do Not Operate

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COMBINATION SWITCH INPUT SIGNAL
With CONSULT-II

Select "BCM" on CONSULT-II. With "FLASHER" data monitor, make sure "TURN SIGNAL R" and "TURN SIGNAL L" turns ON-OFF linked with operation of lighting switch.

When lighting switch is in TURN RH position : TURN SIGNAL R ON

When lighting switch is in TURN LH position : TURN SIGNAL L ON

Fig 1: Identifying CONSULT II Display - DATA MONITOR

Without CONSULT-II

Refer to "COMBINATION SWITCH INSPECTION ".

OK or NG

OK: Replace the BCM. Refer to "REMOVAL AND INSTALLATION ".

NG: Check lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".