LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 827 (Brake System) >> Brake Pedal >> Removal and Installation >> Removal For Non-Adjustable Brake Pedal

Removal For Non-Adjustable Brake Pedal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not deform the brake tube.
CAUTION:
  • Do not disassemble the brake pedal assembly.
  • Avoid damage from dropping the brake pedal assembly during handling.
  • Keep the brake pedal assembly away from water.
  1. Remove the lower driver instrument panel. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the stop lamp switch and ASCD cancel switch from the pedal assembly.
  3. Remove snap pin and clevis pin from the clevis of the brake booster.
  4. Remove mounting nuts and the pedal assembly.
    • Temporarily install the nuts by hand to support the booster.
scientia non olet · About LEMON Manuals