LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 827 (Brake System) >> Brake Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain brake fluid. Refer to "DRAIN AND REFILL ".
  2. Disconnect harness connectors for fluid level sensor and pressure sensor.
  3. Using a flare nut wrench, disconnect brake tube from master cylinder assembly.
  4. Remove master cylinder assembly mounting nuts and master cylinder assembly.
scientia non olet · About LEMON Manuals