LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Manual Air Conditioner) >> Trouble Diagnosis >> Intake Door Motor Circuit >> Inspection Flow

Inspection Flow

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CONFIRM SYMPTOM BY PERFORMING OPERATIONAL CHECK - REC ( ) 
    1. Turn blower control dial to 4.
    2. Turn mode dial to vent mode ( ).
    3. Press REC ( ) switch.
    4. Press REC ( ) switch again.
    5. Listen for intake door position change (you should hear blower sound change slightly).

    Can a symptom be duplicated? 

    YES: GO TO  3.

    NO: GO TO 2.

  2. PERFORM COMPLETE OPERATIONAL CHECK 

    Perform a complete operational check and check for any symptoms. Refer to "OPERATIONAL CHECK (FRONT) ".

    Can a symptom be duplicated? 

    YES: Refer to "SYMPTOM TABLE ".

    NO: System OK.

  3. CHECK FOR SERVICE BULLETINS 

    Check for any service bulletins.

    GO TO 4.

  4. CHECK INTAKE DOOR OPERATION 

    Check and verify intake door mechanism for smooth operation.

    OK or NG 

    OK: GO TO 5.

    NG: Repair intake door mechanism.

  5. RECHECK FOR ANY SYMPTOMS 

    Perform a complete operational check for any symptoms. Refer to "OPERATIONAL CHECK (FRONT) ".

    Does another symptom exist? 

    YES: Refer to "SYMPTOM TABLE ".

    NO: Replace front air control. Refer to "FRONT AIR CONTROL ".