LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Body, Lock & Security System) >> Hood >> Fitting Adjustment >> Hood Lock Adjustment

Hood Lock Adjustment

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grille. Refer to "FRONT GRILLE ".
  2. Move the hood lock to the left or right so that striker center is vertically aligned with hood lock center (when viewed from vehicle front).
  3. Make sure the secondary latch is properly engaged with the secondary striker with hood's own weight by dropping it from approx. 200 mm (7.87 in) height or by pressing it lightly approx. 3 kg (29 N, 7lb).
    CAUTION: Do not drop the hood from 300 mm (11.81 in) height or higher.
    Fig 1: Adjusting Hood Lock
    G04895637
  4. After adjusting hood lock, tighten the lock bolts to the specified torque.
    Fig 2: Identifying Front Grille Lock Bolts
    G04912692
  5. Install the front grille. Refer to "FRONT GRILLE ".