LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Body, Lock & Security System) >> Door >> Fitting Adjustment >> Rear Door >> Longitudinal clearance and surface height adjustment at front end

Longitudinal clearance and surface height adjustment at front end

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center pillar upper finisher. Refer to "BODY SIDE TRIM ".
  2. Loosen the lower hinge bolts.
  3. From inside the vehicle, loosen the upper hinge nuts. Open the door, and raise or lower the rear end of the door to adjust.
  4. Install the center pillar lower finisher. Refer to "BODY SIDE TRIM ".
scientia non olet · About LEMON Manuals