LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 821 (Maintenance) >> Chassis And Body Maintenance >> Checking Transfer Fluid >> Fluid Leakage And Fluid Level

Fluid Leakage And Fluid Level

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that fluid is not leaking from the transfer assembly or around it.
  2. Check fluid level from the filler plug hole.
    CAUTION: Do not start engine while checking fluid level.
    • Check the ATX14B as shown.
      Fig 1: Checking Fluid Level (ATX14B)
      G04901437
    • Check the TX15B as shown.
      Fig 2: Checking Fluid Level (TX15B)
      G04896924
  3. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "COMPONENTS " (ATX14B), "COMPONENTS " (TX15B).
    CAUTION: Do not reuse gasket.