Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
Remove the carrier cover bolts and separate the carrier cover from the gear carrier using Tool.
Tool number : KV10111100 (J-37228)
CAUTION:
- Do not damage the mating surface.
- Do not insert flat-bladed screwdriver, this will damage the mating surface.
  
  Fig 1: Locating Carrier Cover Bolts