LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Engine Cooling System) >> Water Outlet And Water Piping >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Completely drain engine coolant. Refer to "DRAINING ENGINE COOLANT ".
    CAUTION:
    • Perform this step when engine is cold.
    • Do not spill engine coolant on drive belts.
  2. Remove A/T fluid charging pipe Refer to "TRANSMISSION ASSEMBLY ".
  3. Remove the rocker cover (right bank). Refer to "REMOVAL AND INSTALLATION ".
  4. Remove engine coolant temperature sensor as necessary.
    CAUTION: Be careful not to damage engine coolant temperature sensor.
  5. Remove water outlet, heater pipe, water bypass hoses and water pipe.
scientia non olet · About LEMON Manuals