LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Oil Seal >> Removal and Installation of Front Oil Seal >> Removal

Removal and Installation of Front Oil Seal: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine undercover using power tools.
  2. Remove drive belts. Refer to "REMOVAL ".
  3. Remove engine cooling fan assembly. Refer to "ENGINE COOLING FAN ".
  4. Remove crankshaft pulley. Refer to "REMOVAL ".
  5. Remove front oil seal using suitable tool.
    CAUTION: Be careful not to damage front timing chain case and crankshaft.
    Fig 1: Identifying Front Oil Seal
    G04878405Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals