LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Intake Manifold >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. Refer to "FUEL PRESSURE RELEASE ".
  2. Remove intake manifold collector. Refer to "REMOVAL ".
  3. Remove fuel tube and fuel injector assembly. Refer to "REMOVAL ".
  4. Loosen nuts and bolts with power tool in reverse order as shown below to remove intake manifold.
    Fig 1: Intake Manifold Bolt And Nuts Tightening Sequence
    G04893989Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove gaskets.
    CAUTION: Cover engine openings to avoid entry of foreign materials.
scientia non olet · About LEMON Manuals