LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Ignition Coil >> Removal and Installation >> Removal (Right Bank)

Removal (Right Bank)

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake manifold collector with power tool. Refer to "REMOVAL ".
  2. Move aside harness, harness bracket, and hoses located above ignition coil.
  3. Disconnect harness connector from ignition coil.
  4. Remove ignition coil.
    CAUTION: Do not shock it.
scientia non olet · About LEMON Manuals